SP1023 1-1/2-Inch FIP Inlet Return Fitting with Locknut and Gasket Exact Replacement for Hayward with 3/4" Directional Flow Eyeball Inlet Jet- Fit in-Ground and Above Ground Swimming Pools（2Pack）

Pokin SP1023 1-1/2-Inch FIP Inlet Return Fitting with Locknut and Gasket with Extra White 3/4-Inch Opening Hydrostream Directional Flow Inlet Fitting(4Pack) Pack Include: 2 × SP1023 1-1/2-Inch FIP Inlet Return Fitting 2 × extra 3/4" Directional Flow Eyeball Inlet JetInstallation: 1.The flanged nut end, as well as one gasket, should be outside the pool, behind the fiberglass or vinyl liner. 2.Another gasket should be on the inside of the pool together with the return fitting body. This means that the liner would be sandwiched with one gasket on each side. 3.A dab of silicone sealant on the side of the gaskets in contact with the liner will provide an additional sealing layer. 4.Pass the fitting body through one gasket, the liner hole, the other gasket, and finally thread it with the flanged nut. 5.Do not over-tighten. Check the tightness over the next few days to ensure that there are no leaks.

• 【 SP1023 1 1/2-Inch Fip Inclt Return Fitting】With 1.5 inches internal threads, this FIP (internal thread) inlet fitting is suitable for use with plugs, outlet covers, directional fittings (eyeball fittings),JetAir hydrotherapy fittings, aftermarket jet nozzles, and more.
• 【Include locknut and Gasket】Both the locknut and the gasket allow the inlet fitting to attach through the fiberglass pools or vinyl pool liners without leaking.Consists of 4 parts:a flanged nut (lock nut), 2 separate gaskets, a fiber washer, and the inlet fitting body.【Extra 2 Best Gift】 2 White 3/4-Inch Opening Hydrostream Directional Flow Inlet Fitting with 1-1/2-Inch MIP Thread.Hydro stream directional flow inlet fitting and allows to control the velocity and flow
• 【Front 1-1/2-Inch Fip Thread for Eyeball Fitting】The flanged nut end of the inlet return fitting goes inside the pool to receive 1 1/2 MIP Hydrostream Directional Flow Inlet Fitting, JetAir hydrotherapy fitting, and more. It’s compatible with most Hayward return fittings that require 1 1/2 inches FIP threads.
• 【Back 1-1/2-Inch Fip Thread for Hose Fitting】Can use a threaded to clamp style/hose barb hose adapter or a 1 1/2 slip x 1 1/2 MPT adapter for hard plumbing connections. Can create a manifold or adjust connections according to your preference. This return inlet fitting would give you many options.
• 【AFTER BUYING SERVICE】Fast response,super easy to install and clean, 30ms quick response, high durability. Buy with confidence, if you have any questions, please contact us for a replacement. We will reply you within 24 hours and help you solve the problem.